Mold in the house is a very common problem with most home-owners. If you want to stop the mold first you have to stop the humidity. If you have a water damage you have and mold in your house.
I have the same problem with mold and I can tell you some advices how to remove it. I hope that the tips will be useful for you.
Of course that I'm not the one who create the methods. One Sydney cleaning company shared with me their methods for effective mold removing methods.
The most important thing is to destroy the source that the mold grows from. For your safety and good health of your family you should act very quickly and you have to find immediately the black mold. When you find the problem you have to dry out the area the best way you can. Then you need to use just soap and scrub the infested area. If you find the mold on the wood floor you have to sand the area. The easiest way is to use just soap, because the bleach doesn't remove the mold! But after removing the mold you can use a bleach for disinfect.
The next moment is if you find mold on your carpet. First thing you should do to protect the carpet is to keep it dry. So be careful! Sydney cleaners advice to remove the mold it is good to use natural cleaning products, but be sure that you use the proper one that will not damage carpeting.
In the end you need to keep your house clean and without mold. But this enterprise is very hard. To prevent further mold growth, make sure you keep the area very dry. Keep your eyes open especially for soap, paper, dirt and wood.
0 comments:
Post a Comment